Toshiba e-STUDIO2500c Service Manual page 253

[G] Drum motor (M10)
Note:
Never remove the damper fixed on the drum drive unit with 2 screws (red).
When the drum motor is replaced, discard the dumper attached to the new motor and install it to
the existing dumper on the frame instead.
(1) Take off the Drum drive unit.
P.11-20 "[F] Drum drive unit"
(2) Remove 2 screws and take off the drum
motor.
[H] Drum switching motor (M11)
(1) Take off the Drum drive unit.
P.11-20 "[F] Drum drive unit"
(2) Remove 1 screw and take off the drum
switching motor.
May 2006 © TOSHIBA TEC
Drum motor
Fig. 11-38
Fig. 11-39
e-STUDIO2500c/3500c/3510c PROCESS UNIT RELATED SECTION
11 - 21
Drum drive unit
Drum switching motor
11