Toshiba e-STUDIO2500c Service Manual page 226

(4) Remove 1 screw, 3 gears and the bracket
with gear.
Note:
Replace the registration motor with the
damper and the bracket installed.
Note:
Never attempt to loosen 4 screws with lock
paint.
[P] Registration roller (Metal)
(1) Take off the registration motor unit.
P.10-37 "[N] Registration motor unit"
(2) Take off the registration guide.
P.10-33 "[J] Registration guide"
(3) Take off the middle guide.
e-STUDIO2500c/3500c/3510c PAPER FEEDING SYSTEM
Registration motor
Screw
10 - 38
Fig. 10-74
Screw
Screw
Fig. 10-75
Middle guide
Fig. 10-76
May 2006 © TOSHIBA TEC