Toshiba e-STUDIO2500c Service Manual page 379

[C] ADU inside rear cover
(1) Open the automatic duplexing unit.
(2) Remove 2 screws and take off the ADU
inside rear cover.
[D] ADU opening/closing switch (SW7)
(1) Take off the ADU inside rear cover.
P.16-15 "[C] ADU inside rear cover"
(2) Disconnect the connector and release the
latch to take off the ADU opening/closing
switch.
[E] ADU board (ADU)
(1) Take off the automatic duplexing unit and
ADU inside rear cover.
P.16-14 "[B] Automatic Duplexing Unit
(ADU)"
P.16-15 "[C] ADU inside rear cover"
(2) Disconnect 6 connectors from the ADU
board. Release 3 lock supports and take off
the ADU board.
May 2006 © TOSHIBA TEC
Fig. 16-13
ADU opening/closing switch
Fig. 16-14
ADU board
Lock support
Fig. 16-15
e-STUDIO2500c/3500c/3510c AUTOMATIC DUPLEXING UNIT (ADU)
16 - 15
ADU inside rear cover
16