Toshiba e-STUDIO2500c Service Manual page 12
Multifunctional digital color systems
Hide thumbs
Also See for e-STUDIO2500c:
- Operator's manual (414 pages) ,
- Scanning manual (156 pages) ,
- Colour manual (8 pages)
Table of Contents
Advertisement
Reproduction ratio ................... Actual ratio: 100%±0.5%
Resolution/Gradation............... Scanning: 600 dpi × 600 dpi
Eliminated portion.................... Leading edges: 3.0±2.0 mm, Side/trailing edges: 2.0±2.0 mm (black
Paper feeding .......................... Standard drawers:
Capacity of originals in the reversing automatic document feeder (Option)
.................................................. A3 to A5-R, LD to ST-R:
Automatic duplexing unit ......... Stackless, Switchback type
Toner supply ............................ Automatic toner density detection/supply
Density control......................... Automatic density mode and manual density mode selectable in 11
Weight ..................................... Approximately 120 kg (264.55 lb.)
Power requirements ................ AC 110 V / 13.2 A, 115 V or 127 V / 12 A
* The acceptable value of each voltage is ±10%.
Power consumption................. 1.5 kW or less (100 V series), 17 kW or less (200 V series)
* The electric power is supplied to the RADF, Finisher, PFP and LCF through the equipment.
Total counter............................ Electronical counter
Dimensions of the equipment...................... See the figure below (W 699 x D 761 x H 759 (mm))
* When the tilt angle of the control panel is 45 degrees.
e-STUDIO2500c/3500c/3510c SPECIFICATIONS/ACCESSORIES/OPTIONS/SUPPLIES
Zooming: 25 to 400% in increments of 1% (25 to 200% when using
RADF)
Printing: Equivalent to 2400 dpi × 600 dpi (black print, except gray
scale)
600 dpi × 600 dpi (color print / gray scale)
copy)
Leading edges: 5.0±2.0 mm, Side/trailing edges: 3.0±2.0 mm (color
copy)
Leading / trailing edges: 5.0±2.0 mm, Side edges: 5.0±2.0 mm (black /
color print)
2 drawers (stack height 60.5 mm, equivalent to 550 sheets; 64 to 80 g/
2
m
(17 to 22 lb. Bond))
PFP:
Option (One drawer or two: stack height 60.5 mm, equivalent to 550
2
sheets; 64 to 80 g/m
(17 to 22 lb. Bond))
LCF:
Option (Stack height 137.5 mm x 2: equivalent to 2500 sheets; 64 to 80
2
g/m
(17 to 22 lb. Bond))
Bypass feeding:
Stack height 11 mm: equivalent to 100 sheets; 64 to 80 g/m
lb. Bond)
2
100 sheets / 80 g/m
(Stack height 16 mm or less)
Toner cartridge replacing method
steps
220-240 V / 8 A (50/60 Hz)
H
Fig. 1-1
1 - 4
D
45°
W
2
(17 to 22
May 2006 © TOSHIBA TEC
Advertisement
Table of Contents
