Toshiba e-STUDIO2500c Service Manual page 183

(3) Take off the laser optical unit.
P.8-12 "[A] Laser optical unit"
(4) Take off the 4 ducts of the discharge LEDs.
P.11-19 "[D] Discharge LED (ERS-Y,
ERS-M, ERS-C, ERS-K)"
(5) Disconnect 2 connectors and remove 2
screws. Then take off the front hinge cover
by releasing 8 hooks.
(6) Take off the left lower cover.
P.2-31 "[I] Left lower cover"
(7) Disconnect 1 connector.
(8) Remove 7 screws and take off the metal
plate on the left side.
Note:
Check printed images after assembling the
unit.
May 2006 © TOSHIBA TEC
Front hinge cover
Fig. 8-18
Fig. 8-19
Plate
Fig. 8-20
e-STUDIO2500c/3500c/3510c LASER OPTICAL UNIT
8 - 15
8