Toshiba e-STUDIO2500c Service Manual page 212

(3) Disconnect 1 connector. Remove 1 screw
and take off the sensor plate.
(4) Release the latch to take off the bypass feed
sensor.
Note:
Be careful not to come off the sensor arm
and the sensor spring after taking off the
sensor.
[B] Drawer feeding unit
[B-1] Drawer feeding unit
(1) Take off the upper and lower drawers.
(2) Remove 1 screw and take off the drawer
feeding unit by sliding it to the front side.
e-STUDIO2500c/3500c/3510c PAPER FEEDING SYSTEM
Sensor plate
Connector
Sensor spring
Sensor arm
Drawer feeding unit
10 - 24
Fig. 10-36
Bypass feed sensor
Fig. 10-37
Fig. 10-38
May 2006 © TOSHIBA TEC