Toshiba e-STUDIO2500c Service Manual page 381

[I] ADU drive unit / ADU motor (M22)
(1) Take off the ADU clutch.
P.16-16 "[H] ADU clutch (CLT7)"
(2) Remove the spring.
(3) Remove 1 screw and take off the ADU rear
latch.
(4) Disconnect 1 connector. Release the har-
ness from 2 harness clamps. Remove 2
screws and take off the ADU drive unit.
Note:
Be sure not to lose the belt.
May 2006 © TOSHIBA TEC
Fig. 16-19
Fig. 16-20
ADU drive unit
Fig. 16-21
e-STUDIO2500c/3500c/3510c AUTOMATIC DUPLEXING UNIT (ADU)
16 - 17
Spring
ADU rear latch
16