Toshiba e-STUDIO2500c Service Manual page 324

[C] Image position aligning sensor (rear) (S17)
(1) Take off the image quality control unit
P.14-5 "[A] Image quality control unit"
(2) Remove 2 screws and take off the image
position aligning sensor (rear).
[D] Image quality sensor (S18)
(1) Take off the image quality control unit
P.14-5 "[A] Image quality control unit"
(2) Remove 2 screws and take off the image
quality sensor.
[E] Sensor shutter solenoid (SOL2)
(1) Take off the image quality control unit
P.14-5 "[A] Image quality control unit"
(2) Remove 2 screws and take off the sensor
shutter solenoid.
e-STUDIO2500c/3500c/3510c IMAGE QUALITY CONTROL
Image position aligning sensor ( rear )
Image quality sensor
14 - 6
Fig. 14-5
Fig. 14-6
Sensor shutter solenoid
Fig. 14-7
May 2006 © TOSHIBA TEC