Toshiba e-STUDIO2500c Service Manual page 215

[B-5] Feed roller
(1) Take off the separation roller holder.
P.10-26 "[B-4] Separation roller"
(2) Remove the clip and take off the feed roller.
[B-6] Pickup roller
(1) Take off the drawer feeding unit.
P.10-24 "[B-1] Drawer feeding unit"
(2) Remove the pickup roller assembly from the
pickup arms and take off the belt.
(3) Remove 3 E-rings, pulley, one-way clutch
and take off the pickup roller.
May 2006 © TOSHIBA TEC
Feed roller
Clip
Fig. 10-44
Belt
Fig. 10-45
Pickup roller
Fig. 10-46
e-STUDIO2500c/3500c/3510c PAPER FEEDING SYSTEM
10 - 27
Pickup roller assembly
E-ring
One-way clutch
E-ring
Pulley
10