Toshiba e-STUDIO2500c Service Manual page 67

(3) Remove 8 screws and take off the rear
cover-2.
Note:
Disconnect the connector of the RADF first
when the RADF is installed.
(4) Remove 3 screws and take off the rear
cover-3.
(5) Remove 1 screw and the ground wire, and
then disconnect 1 connector.
May 2006 © TOSHIBA TEC
Fig. 2-75
Fig. 2-76
Fig. 2-77
e-STUDIO2500c/3500c/3510c OUTLINE OF THE MACHINE
2 - 51
2