Toshiba e-STUDIO2500c Service Manual page 213

[B-2] Tray-up sensor (S31/S35) / Empty sensor (S32/S36)
(1) Take off the drawer feeding unit.
P.10-24 "[B-1] Drawer feeding unit"
(2) Disconnect the connector and release the
latch to take off the tray-up sensor.
(3) Disconnect the connector and release the
latch to take off the empty sensor.
[B-3] Paper stock sensor (S33/S37)
(1) Take off the drawer feeding unit.
P.10-24 "[B-1] Drawer feeding unit"
(2) Pull up the paper stock sensor arm.
(3) Disconnect the connector and release the
latch to take off the paper stock sensor.
May 2006 © TOSHIBA TEC
Empty sensor
Fig. 10-39
Paper stock sensor
Fig. 10-40
e-STUDIO2500c/3500c/3510c PAPER FEEDING SYSTEM
10 - 25
Tray-up sensor
Sensor arm
10