Mitsubishi 3000GT Service Manual page 839

SERVICE BRAKES - Anti-lock Braking System Troubleshooting
With the ignition key in the "ON" position,
do other warning lights (except door-ajar
warning light, seat belt warning light) illu-
minate?
Yes
Turn the ignition switch OFF and check.1
I
Is the ABS warning light normal?
for burned bulb.)
Is there continuity between combiination
meter No. 58 and No. 59 terminals?
Yes
drive circuits. Check both circuits.
No
Check fuse No. 11. If it is
blown, correct the cause of
the blown fuse and then re-
Remove the combination me-
ter, and check with the igni-
tion key "ON".
Does voltage between har-
ness connector terminal No.
14 and ground indicate bat-
tery positive voltage?
is broken.
burned.
-- * 1 Faulty combination meter
Connect connectors firmly.
(Check for pins pulled out or
bent, and repair as needed.)
Revision
TSB
No
Yes
Repair or replace combina-
tion meter.
I