MANUAL TRANSAXLE <AWD> - Transaxle Control
Air intake hose B
Air hose C
I
INSTALLATION SERVICE POINTS
Refer to P.22-7.
If the vacuum pipe has a stepped part, connect the vacuum
hose to the pipe securely, up to the stepped part, as shown
in the figure.
Align slots indicated by arrows in air intake hose A with
markings on air intake hoses B and C; then, insert hoses
B
C all the way into air intake hose A.
Connect the hoses ensuring that paint marks are aligned
with projections. Insert air hoses B and C into air hose A
all the way, or up to the step in hose A.
INSPECTION
Check the transaxle control cable assembly for function
l
and for damage.
Check the boot for damage.
l
Check each bushing for wear or abrasion, sticking, imped-
l
ed action, and damage.