SDU
L
I
2) Install air bag module to check fit or alignment
with steering wheel.
3) Check steering wheel for noise, binding or difficult
operation, or excessive free play.
(3) Check harnesses for binding, connectors for damage,
poor connections, and terminals for deformities. (Refer
to PS2B-18.)
collision
Check the SRS components.
If the SRS components are showing any visible damage such
as dents, cracks, or deformation, replace them with new ones.
Concerning parts removed for inspection, replacement with
new parts and cautionary points for working, refer to appropri-
ate COMPONENT SERVICE, P.528-68.
Front Impact Sensors
(1) Check front upper frame lower for deformities or rust.
(2) Check front impact sensor for dents, cracks, deformities
or rust.
(3) Check sensor harnesses for binds, connectors for dam-
age, and terminals for deformities.
SRS Diagnosis Unit (SDU)
(1) Check SDU case and brackets for dents, cracks or defor-
mities.
(2) Check connectors and lock lever for damage, and termi-
nals for deformities.