STEERING - Power Steering Gear Box
End of insertion
Lock nut
Screw in tie rod end to have its right and left length as
illustrated. Lock with lock nut.
INSPECTION
RACK CHECK
Check the rack tooth surfaces for damage or wear.
l
Check the oil seal contact surfaces for uneven wear.
l
Check the rack for bends.
l
PINION AND VALVE ASSEMBLY CHECK
Check the pinion gear tooth surfaces for damage or wear.
l
Check for worn or defective seal ring.
l
BEARING CHECK
Check for roughness or abnormal noise during bearing
l
operation.
Check the bearing for play.
l
Check the needle roller bearings for roller slip-off.
l
OTHERS CHECK
Check the cylinder inner surface of the rack housing for
damage.
Check the boots for damage, cracking or deterioration.
l
Check the rack support for uneven wear or dents.
l
Check the rack bushing for uneven wear or damage.
l
TSB Revision