Mitsubishi 3000GT Service Manual page 551

C L U T C H
3
I
Air intake hose A
i n t a k e hos.o~FOo,,
Air hose A
REMOVAL SERVICE POINT
NOTE
Since the check valve is fit to the vacuum hose C, replace
the check valve as an assembly unit together with the vacuum
hose C if the check valve is defective.
INSTALLATION SERVICE POINTS
If a hose is connected to a pipe with a stepped part, insert
the hose up to the stepped part.
If it is connected to a pipe without any stepped part, insert
the hose until the insertion amount reaches the standard
value.
Align slots indicated by arrows in air intake hose A with A
markings on air intake hoses B and C; then, insert hoses
B and C all the way into air intake hose A.
Insert air intake hoses B and C all the way up to the roots
on the turbocharger end.
Connect the air hoses ensuring that alignment marks are
aligned with projections.
Insert air hoses B and C into pipe all the way to its step.
INSPECTION
Check the hose and pipes for cracks, bend, deformation
l
and clogging.
Check the vacuum tank for deformation or crack.
l