Mitsubishi 3000GT Service Manual page 1213

MB991349 (Up to 1993 models)
MB991530 (From 1994 models)
SRS Check Harness
View A
To No.7
connector
White paint
of clock
SRS - Air Baa Module and Clock Spring
(4) Check for the resistance between the terminals.
a. Join the No. 2 connector (air bag module side) and
b. Check for continuity between terminal 1 and terminal
Standard value: less than
I
To No.;
connector
of clock
spring
woo2586
TSB
Revision
No. 7 connector of clock spring to connector (4) and
connector (3), respectively, of the SRS Check Har-
ness.
NOTE
When joining SRS Check Harness connector (4), align
its white paint with the hollow portion of the No. 2
connector of the clock spring.
21, and terminal 2 and terminal 22, of SRS Check
Harness connector (5) using a digital multi-meter.
0.4 Q