Rack stopper
STEERING - Power Steering Gear Box
Using a plastic hammer, gently tap the pinion to remove it.
Using a socket, remove the oil seal and the ball bearing
from the valve housing simultaneously.
(1) Turn the rack stopper clockwise until the end of the circlip
comes out of the slot in the rack housing.
(2) Turn the rack stopper anticlockwise to remove the circlip.
0 0 0 0 2 1 7 4
Pull out the rack slowly.
At this time also take out the rack stopper and the rack bushing
simultaneously.
Partially bend oil seal and remove from rack bushing.
Caution
Do not damage oil seal press fitting surface.
TSB Revision