Mitsubishi 3000GT Service Manual page 764

REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
Front Exhaust Pipe Removal and installation
l
(Refer to GROUP 15 - Exhaust Pipe and Main Muffler.)
Under Cover Removal and Installation
l
36 Nm
26 ft.lbs.
Removal steps
1. Transmission stay B
transaxle>
2. Transfer (AWD)
(Refer to GROUP 22 - Transfer.)
FRONT SUSPENSION
I
with automatic
INSTALLATION SERVICE POINT
(1) Align the bushing (LH) with the stabilizer bar marking
end and temporarily tighten the stabilizer bar bracket (LH).
(2) In this condition, mount the stabilizer bar bracket (RH)
and temporarily tighten it.
(3) Temporarily fix the both ends of the stabilizer bar to the
link and tighten the stabilizer bar bracket mounting bolts
to specification.
Left Member and Right Member Removal and
l
Installation (Refer to GROUP 32 - Right Member,
Left Member and Crossmember.)
40 Nm
29 ft.lbs.
3. Stabilizer link
4. Stabilizer bar bracket mounting bolt
6. Bushing
7. Stabilizer bar
6
0 0 0 0 0 6 2 7