HEATERS AND MANUAL AIR CONDITIONING - Evaporator
DISASSEMBLY AND REASSEMBLY
Compressor oil:
FREOL S-83 or SUNISO 5GS
SUN PAG 56
Disassembly steps
1. Clips
2. Auto compressor controller
1996 models>
3. Evaporater case (upper)
4. Fin therm0 sensor <Up to 1995
models>
5. Air inlet sensor <Up to 1995 models
with manual air conditioning>
6
DISASSEMBLY SERVICE POINTS
Remove the clips with a screwdriver covered with a shop
towel to prevent damage to case surfaces.
Loosen the flare nut by using two wrenches
inlet and outlet).
INSPECTION
FIN-THERM0 SENSOR AND AIR-INLET SENSOR
CHECK
For information concerning the checking procedures, refer i/
to P.5518.
TSB Revision
00004224
6. Evaporator case (lower)
7. Evaporator assembly
8. Grommet
9. Insulator
10. Rubber insulator
Clip
11.
12. Expansion valve
10
(for both the