Mitsubishi 3000GT Service Manual page 986

2 1 3 6 0 1 4 8
MB990938
Oil
MB991203
MB990938
Ball
, MB991203
Pinion gear
STEERING - Power Steerina Gear Box
Insert circlip to rack stopper hole through cylinder hole. Turn
rack stopper clockwise and insert circlip firmly.
Caution
Insert circlip to rack stopper hole while turning rack
stopper clockwise.
0 0 0 0 2 1 7 5
Apply a coating of the specified fluid to the outside of the
oil seal. Using the special tools, press the oil seal into the
valve housing.
Specified fluid:
Automatic transmission fluid "DEXRON II"
Apply a coating of the specified fluid to the outside of the
ball bearing. Using the special tools, press the ball bearing
into the valve housing.
Specified fluid:
Automatic transmission fluid "DEXRON II"
(1) Kneed the seal ring to soften it.
(2) Apply the specified fluid to the seal ring, and install to
the rack groove.
Specified fluid:
Automatic transmission fluid "DEXRON II"
(3) Insert the tapered side of the special tool from the pinion
gear side, and compress the seal ring.
Using the special tool, press the oil seal into the valve housing.
Caution
In order to eliminate a seal malfunction at the valve
housing alignment surface, the upper surface of the oil
seal should project outward approximately 1 mm (.040
in.) from the housing edge surface.
00002176