Mitsubishi 3000GT Service Manual page 544

Air hose A
Air
CLUTCH
To disconnect clutch hose from the clutch tube, proceed as
follows:
(1) Secure the nut on the clutch hose and loosen the flare
nut on the clutch tube.
(2) Remove the clip from the clutch hose to remove clutch
hose from bracket.
tube flare nut.
INSTALLATION SERVICE POINTS
Be careful that the clutch hose does not become twisted.
On AWD-vehicles, use a flat type short box wrench to tighten
the clutch release cylinder mounting bolts.
If the vacuum pipe has a stepped part, connect the vacuum
hose to the pipe securely, up to the stepped part, as shown
in the illustration.
Air intake
hose C
Align slots indicated by arrows in air intake hose A with A
markings on air intake hoses B and C; then, insert hoses
B and C all the way into air intake hose A.
Insert air intake hoses B and C all the way up to the roots
on the turbocharger end.
Connect the air hoses ensuring that alignment marks are
aligned with projections.
Insert air hoses B and C into pipe all the way to its step.