Return spring
No continuity
<Vehicles with cruise control>
a
b
SERVICE BRAKES
INSTALLATION SERVICE POINT
Install the return spring with the shorter hook on the brake
pedal.
column
racket
INSPECTION
Check the bushing for wear.
l
Check the brake pedal for bend or twisting.
l
Check the brake pedal return spring for damage.
l
STOP LIGHT SWITCH CHECK
(1) Connect a circuit tester to the stop light switch.
(2) The stop light switch is in good condition if there is no
continuity when the plunger is pushed in to a depth of
within 4 mm (.16 in.) from the outer case edge surface,
and if there is continuity when it is released.
Continuity
For vehicles with the cruise control system, the check
for continuity should be made at connectors "a" and "b"
of the stop light switch.
4mm
00002131
TSB Revision