MANUAL TRANSAXLE 4WD>
60-72 Nm
26 ftlbs.
9. Transaxle mount connection
10. Transaxle mount bracket
12. Transaxle assembly upper part
coupling bolt
13. Tie rod end connection
14. Lower arm ball joint connection
15. Right member
16. Starter
70 Nm
51
REMOVAL SERVICE POINTS
Remove the clutch release cylinder and clutch oil line bracket
installation bolt, and then secure at the body side without
disconnecting the oil line coupling.
Revision
60-70 Nm
43-51 ft.lbs.
17. Drive shaft (Left side), Inner shaft
assembly
19. Transaxle stay (Front bank side)
20. Transaxle stay (Rear bank side)
21. Transaxle assembly lower part
coupling bolt
22. Transaxle assembly
11