Mitsubishi 3000GT Service Manual page 804

REAR SUSPENSION <FWD> - Rear Axle Hub
REMOVAL AND INSTALLATION
50-60 Nm
36-43 ft.lbs.
Removal steps
1. Rear speed sensor CABS>
2. Caliper assembly
3. Brake disc
4. Hub cap
5. Wheel bearing nut
6. Tongued washer
7. Rear hub assembly
Pole piece
Caution
Rear hub unit bearing cannot be disassembled.
REMOVAL SERVICE POINTS
Caution
Be careful when handling the pole piece at the tip of
the speed sensor and the toothed edge of the rotor so
as not to damage them by striking against other parts.
Remove the
of wire.
TSB Revision
8. Rear rotor CABS>
9. Rear hub unit bearing
and suspend it with a piece
caliper assembly