Mitsubishi 3000GT Service Manual page 1161

Is there continuity between the No. 8 termi-
terminal (vehicles from 1994 model) of the
data link connector and the No. 9 terminal
of the SRS Check Harness Connector (5)?
Data link connector
there continuity]
IS
or No. 14 terminal of SRC Check Harness
connector (5) and around?
Yes
Disconnect the connector between the
body wiring harness and instrument panel
wiring harness.
Check for continuity between the grouna
and terminal No. 12 or No. 13 of the body
wiring harness's connector which is con
ness.
NOTE - IMPORTANT
(1) After repairing the SRS, reconnect the battery cable, erase the diagnostic trouble code memory
from the scan tool and check the SRS warning light operation to verify the system functions
properly. (Refer to TEST 1.)
(2) SDU = SRS Diagnosis Unit
SRS
No
connected between the SDU and the
data link connector
No
The harness between SDU and instru-
ment panel wiring harness is short-cir-
cuited.
tween SRS warning lamp and body wir-
ing harness is short-circuited.
TSB Revision
c
Repair or replace the body wiring har-
Replace the SDU.
I
(Refer to P.52B-71.)
Repair or replace the body wiring har-
ness at the location of the short circuit
(Refer to P.528-18, 20.)
*
Repair or replace the instrument panel
wiring harness at the location of the
short-circuit.