Mitsubishi 3000GT Service Manual page 928

SERVICE BRAKES - Front Disc Brake
PAD WEAR CHECK
Measure the thickness at the thinnest and worn area of the
pad. Replace pad assembly when pad thickness is less than
the limit value.
Standard value: 10.0 mm (.39 in.)
Limit: 2.0 mm (08 in.)
Caution
1. When the limit is exceeded, the brake pads on both
2. If there is a large difference in thickness between
the pads on the right and left wheels, check the sliding
portions of the caliper.
TSB Revision