REMOVAL AND INSTALLATION
Post-installation Operation
Wheel Alignment- Adjustment (Refer to P.33A-6.)
l
5
Removal steps
1. Stabilizer link mounting nut (stabilizer
bar side)
2. Stabilizer link mounting nut (lower arm
side)
3. Stabilizer link
4. Self-locking nut connecting lower arm
ball joint to knuckle
5. Lower arm mounting nut
6. Lower arm mounting bolt
7. Clamp mounting self-locking nut
8. Clamp mounting bolt (small)
9. Clamp mounting bolt (large)
FRONT SUSPENSION
shield
NOTE
10. Logw;:rarm clamp mounting self-lock-
11. Lower arm mounting clamp
12. Lower arm
13. Stopper
14. Dust shield
15. Rod bushing
then fully tightened with the vehicle on the ground in the
unladen condition.
00000619