Pre-removal and Post-installation Operation
Floor Console Removal and Installation
l
(Refer to P.52A-10.)
Removal steps
1. Hood lock release handle
2. Rheostat
3. Switch garnish B
4. Knee protector assembly
5. Column cover
6. Glove box striker
7. Glove box and cross pipe cover
8. Passenger seat air bag module
'(Refer to GROUP 52B - Air Bag
Module and Clock Spring.)
INTERIOR - Instrument Panel
CAUTION: SRS
(1) When removing and installing the floor console
(2) For the passenger side air bag module
3
'2
assembly, don't allow any impact or shock to
the SRS diagnosis unit.
removal/installation, always observe the
service procedures of GROUP 528 - Air Bag
Module and Clock Spring.
00002350
9. Center air outlet assembly
10. Heater control assembly installation
screws
11. Meter bezel
12. Combination meter
14. Speaker or plug
15. Harness connector
16. Steering shaft mounting bolts
17. Instrument panel assembly