Mitsubishi 3000GT Service Manual page 1266

HEATERS AND MANUAL,
55-46
AIR CONDITIONING
CONDENSER AND CONDENSER FAN MOTOR
REMOVAL AND INSTALLATION
Pre-removal and Post-installation Operation
Refrigerant Discharge and Charging
l
(Refer to
Generator Removal and Installation
l
(Refer to GROUP 16 - Generator.)
9-11 Nm
7-8 ft.lbs.
O-ring
Compressor oil: FREOL S-83 or SUNISO 5GS
<Vehicles using R-12 refrigerant>
SUN PAG 56
Removal steps
1. Condenser fan motor assembly
2. Fan
3. Motor assembly
4. Shroud
5. Radiator fan
(Refer to GROUP 14 - Radiator.)
18, 25, 22.)
10
17 ft.lbs.
O-ring
assembly
motor
1
REMOVAL SERVICE POINTS
(1) Loosen the flare nut by using two wrenches.
(2) Plug the disconnected hose and pipes and the openings
of the condenser in order to prevent dust, dirt and other
foreign material from entering.
TSB Revision
6
12 Nm
I Y/
6. Insulator installation bolts
7. Discharge pipe A
8. Discharge pipe
10. Bushings
9 Nm
7 ft.lbs.
00002630