Mitsubishi 3000GT Service Manual page 1131

<Rear Seat Belt>
Outer seat belt removal steps
prevent
retractor
Hole ~$-f-&,,
Adjuster bracket iotation
INTERIOR - Seat Belt
45 Nm
INSTALLATION SERVICE POINTS
Bead
(1) Positively
rotating in the hole provided on the body.
(2) Install the anchor plate along the bead of the body.
(1) Route the seat belt switch connector harness on the
adjuster bracket.
(2) Use clips to secure the harness to the adjuster bracket.
(3) Fit the locking claw of the inner seat belt positively in
the locking hole provided in the seat bracket.
TSB Revision
45 Nm
33 ft.lbs.
Inner seat belt removal steps
7. Inner seat belt
8. Inner seat belt bracket
insert the pawl to prevent the retractor from