Valve lift
ENGINE COOLING
INSPECTION
Check that valve closes tightly at room temperature.
l
Check for defects or damage.
l
Check for rust or encrustation on valve. Remove if any.
l
Immerse thermostat in container of water. Stir to raise
l
water temperature and check that thermostat opening
valve temperature and the temperature with valve fully
open [valve lift-over 8 mm (.31 in.)] are at the standard
value.
Standard value:
Opening valve temperature 76S"C (170°F)
Full-open temperature 90°C (194°F)
NOTE
Measure valve height when fully closed. Calculate lift by mea-
suring the height when fully open.
TSB Revision