Mitsubishi 3000GT Service Manual page 571

MANUAL TRANSAXLE <AWD>
R.H. side
For L.H. For R.H.
Dust seal .
TRANSMISSION OIL LEVEL CHECK
Refer to GROUP 00 - Maintenance Service.
TRANSMISSION OIL REPLACEMENT
Refer to GROUP 00 - Maintenance Service.
TRANSFER OIL LEVEL CHECK
Refer to GROUP 00 - Maintenance Service.
TRANSFER OIL REPLACEMENT
Refer to GROUP 00 - Maintenance Service.
DRIVE SHAFT OIL SEALS REPLACEMENT
Disconnect the drive shaft from the transaxle.
(1)
(Refer to GROUP 26 - Drive Shaft.)
(2) Remove the transfer assembly.
(3) Using a flat-tip (-) screwdriver, remove the oil seal.
(4) Install the oil seals using the following procedure:
Using the special tool, tap the oil seal into the transaxle.
Note that there are two types of oil seals, one for R.H.
and the other for L.H., and the shape of each type is
different, as shown.