Mitsubishi 3000GT Service Manual page 953

PARKING BRAKES - Parking Brake Lever and Parking Brake Cable
bolt
REMOVAL SERVICE POINT
Expand the shoe & lining assembly and remove the shoe
hold down cup.
INSTALLATION SERVICE POINTS
The shoe-to-anchor spring must be installed in the sequence
shown in the illustration.
Caution
Each shoe-to-anchor spring has a unique spring load
and the spring "a" is painted to prevent erroneous
installation.
NOTE
The figure shows the left wheel; for the right wheel, the position
in symmetrical.
Install the adjuster facing the left adjusting bolt to the vehicle
front and right adjusting bolt to the vehicle rear.
36-7