Mitsubishi 3000GT Service Manual page 1129

REMOVAL AND INSTALLATION
Rear seat removal steps
2. Rear seat back
Hole in floor
INTERIOR - Rear Seat
REMOVAL SERVICE POINT
With the lever pulled, raise the seat cushion, and remove
the seat cushion.
INSTALLATION SERVICE POINT
(1) Fit the attachment wire of the seat cushion under the
(2) Pass the rear seat belt buckle through the seat cushion.
(3) Insert the lock plate of the seat cushion in the respective
holes provided in the floor.
Striker removal steps
3. Quarter trim (Refer to P.52A-13.)
4. Striker
I