INTERIOR - Seat
(1) Positively insert the pawl to prevent the retractor from
rotating in the hole provided on the body.
(2) After connecting the seat belt harness with the body
harness, insert the clip on the connector into the hole
on the body panel.
prevent
rotation
(3) Insert the pawl of the belt guide in the hole provided
on the body.
(4) Install the final anchor of the front seat belt with the belt
twisted 180" at the section between the sash guide and
the final anchor so that the tip of the tongue is directed
toward the front of the vehicle.
INSPECTION
BUCKLE SWITCH CHECK
(1) Disconnect the buckle switch connector.
(2) Check the continuity between the terminals.
Items
Buckle unlock
Buckle lock
BUZZER CHECK
Check that buzzer sounds when battery voltage is applied
to the buzzer terminal.
TSB Revision
Belt
Terminal No.
1
2
0
0
3
4
0
0