Mitsubishi 3000GT Service Manual page 440

15-22
INTAKE AND EXHAUST - Turbocharger (Front)
Hose end . . . paint
Pipe end . . . protrusion
Air intake hose B
Aligning the marks at the points indicated by the arrows,
insert securely into the stepped portion of the pipe.
Caution
Be careful not to allow any foreign matter to get into
the hoses or pipes.
Engaging the notches with A marks at the points indicated
by the arrows, insert until seated.
Insert the turbocharger end of air intake hose 6 completely.
INSPECTION
TURBOCHARGER ASSEMBLYCHECK
Visually check the turbine wheel and the compressor
l
wheel for cracking or other damage.
Check whether the turbine wheel and the compressor
l
wheel can be easily turned by hand.
Check for oil leakage from the turbocharger assembly.
l
Check whether or not the turbocharger waste gate valve
l
remains open. If any problem is found, replace the part
after disassembly.
OIL PIPE AND OIL-RETURN PIPE CHECK
Check the oil pipe and oil-return pipe for clogging, bending,
or other damage.
If there is clogging, clean it.
TSB Revision