Mitsubishi 3000GT Service Manual page 658

GENERAL SPECIFICATIONS
PROPELLER
SHAFT
Items
Length x O.D. mm (in.)
Length x O.D. mm (in.)
UNIVERSAL JOINT
Items
No. 1 (front)
No. 2 (center front)
No. 3 (center rear) [Lobro joint]
No. 4 (rear)
Lubrication
Size mm (in.) Cross type joint journal O.D.
Constant velocity joint O.D.
NOTE
Propeller shaft length indicates the length between the center points of each joint.
SERVICE SPECIFICATIONS
Items
Propeller shaft runout
(Dial indicator reading) mm (in.)
LUBRICANTS
Items
Sleeve yoke surface
Lobro joint Outer and inner races
assembly
ball grooves
Lobro joint assembly
inner part
ADHESIVE
Item
Lobro joint rubber packing
PROPELLER SHAFT - Specifications
Specifications
4 joint propeller shaft
Front 673.5 x 65 (26.52 x 2.56)
662.5 x 65 (26.08 x 2.56)
Center
Rear 555.5 x 75 (21.87 x 2.95)
698.5 x 65 (27.50 x 2.56)
Front
Center 662.5 x 65 (26.08 x 2.56)
555.5 x 65 (21.87 x 2.56)
Rear
Specifications
Cross type
Cross type
Constant velocity type
Cross type
Pre-packed type
16 (.63)
99.73 (3.93)
Limit
0.6 (.024) or less
Front
Center 0.6 (.024) or less
0.6 (.024) or less
Rear
Specified lubricant
Hypoid Gear Oil/API classification
GL-4, SAE 75W-90 or 75W-85W
Repair kit grease
Repair kit grease
Specified adhesive
3M ATD Part No. 8155 or equivalent
TSB
Revision
Quantity
As required
As required
45-55 g