Mitsubishi 3000GT Service Manual page 993

POWER STEERING HOSES
REMOVAL AND INSTALLATION
Pm-removal and Post-installation Operation
Power Steering Fluid Draining, Supplying,
l
and Bleeding (Refer to P37A-10,ll.)
<Vehicles with 4WS>
12 Nm 5 Nm
4 ft.lbs.
8 ft.lbs.
Removal steps
1. Return hose
2. Suction hose
3. Return hose
ä
l $ 2;9ure hose
STEERING - Power Steering Hoses
<Vehicles without 4WS>
12 Nm
8 ft.lbs.
- - - - - - - 12 Nm
INSTALLATION SERVICE POINT
(1) Connect the pressure hose so that its slit part contacts
the oil pump's guide bracket.
(2) When the pressure hose is installed, align the white line
on the pressure hose with the white line on the pressure
tube so that together they form a straight line.
White line
TSB Revision
12 Nm
8 ft.lbs.
22 Nm
35 Nm
25 ft.lbs.
15 Nm
11 ft.lbs.
6. Cooler tube
7. Pressure tube
8. Return tube
9. O-ring
10. Oil reservoir
24 Nm
17 ft.lbs.