CONTINUED FROM PREVIOUS PAGE
CONTINUED ON NEXT PAGE
SRS - Troubleshooting
(1) Reconnect negative terminal of battery.
(2) Use the scan tool (when connecting the scan tool (MUT-II
to a vehicle up to 1993 model, use the adapter harries:
supplied together).
Caution
Before connecting or disconnecting the scan tool
make sure that the ignition switch is placed at tht
OFF position.
(3) Turn the ignition key to the "ON" position, erase the diag
(4) Return the ignition key from the "ON" to the "LOCK
position and then back to the "ON" position.
TSB Revision
CONTINUED FROM p.528-36, 40