Mitsubishi 3000GT Service Manual page 1042

42-36
Section A
Section B
Section C
l 1 : Glass surface
l
Body surface
2:
mm (in.)
mm (in.)
Cut off nozzle tip
BODY - Quarter Window Glass
INSTALLATION SERVICE POINT
INSTALLATION
(1) Apply a uniform coat of primer to the illustrated areas
of the body and glass making sure it is applied without
breaks or thin spots.
Caution
1. The primer is used to strengthen bonding power.
Make sure that it covers the surfaces completely.
Note that the primer if applied to thick can cause
loss of bonding power.
2. Never touch the primer
(2) Allow 3 to 30 minutes to dry the primer.
00002250
all around the windshield glass uniformly.
Adhesive:
3M SUPER FAST URETHAN 8609 or equivalent
NOTE
Cutting the nozzle tip of the sealant gun to a V-shape
will help application.
TSB Revision
coated
surface.