AUTOMATIC TRANSAXLE
Symptom
Defective selector lever assembly
Selector lever cannot
be shifted from R to P.
Improperly
Ignition key cannot be
Foreign matter wedged in lock cams A and
turned to LOCK posi-
B
Improperly adjusted key interlock cable, Check, adjust, and replace key 23-56
sticking inner cable
Binding slide lever inside key cylinder
Ignition key can be
Damaged lock cam A
turned to LOCK posi-
Loose key cylinder cover
tion even with selec-
tor lever in position
Broken key interlock cable, loose connec-
other than P.
tions, elongated inner cable
Damaged cam lever inside key cylinder
Buzzer does
not Defective buzzer
sound even when se-
Open-circuited buzzer circuit harness
lector lever is placed
in R position.
Defective park/neutral position switch
Improperly adjusted transaxle control cable
Probable cause
adjusted
transaxle control cable
Remedy
Check and replace selector lever
assembly.
Adjust transaxle control cable.
Check and replace lock cams A
and B.
interlock cable.
Check slide lever.
Check and replace lock cam A.
Check and retighten cover.
Check and replace key interlock
cable.
Check and replace cam lever.
Check and replace buzzer.
Check or correct harness.
Check and replace park/neutral -
position switch.
Adjust transaxle control cable.
Ref. page
23-55
23-57
23-59
23-56
23-59
23-56
23-56
23-56
23-56
23-55