Mitsubishi 3000GT Service Manual page 937

SERVICE BRAKES - Hvdraulic Unit (Huh Relav CABS>
<From 1996 models>
.
REMOVAL SERVICE POINTS
Pull. up the relay box with harness attached and inserting
a hand under the relay box, remove the brake tube using
the flare nut wrench.
Remove the hydraulic unit together with the bracket from
the wheel house.
Caution
1. The HU is heavy. Use care when removing it.
2. The HU cannot be disassembled. Never loosen its
nuts or bolts.
3. Do not drop or shock the HU.
4. Do not turn the HU upside down or lay it on its side.
INSTALLATION SERVICE POINTS
Connect the grounding wire at the point shown in the illustra-
tion.
Pull up the relay box with harness attached and inserting
a hand under the relay box, install the brake line using flare
nut wrench.
Connect the line and hose to the hydraulic unit correctly.
(Refer to P-35-93.)
TSB Revision
35-111