Mitsubishi 3000GT Service Manual page 1088

EXTERIOR - Garnishes and Mouldings
Side Garnish Installation
(1) Remove strip paper from the pressure sensitive double-
sided tape.
NOTE
Affix adhesive tape to the end of strip paper for ease
of strip paper removal.
(2) With its clips and bolts aligned with the respective holes
in the body, install the side garnish to the body.
NOTE
If it is hard to affix the pressure sensitive double-sided
tape in winter, heat the application surface of the body
and the adhesive surface of the side garnish before affixing
the tape.
Body . . . . . . . . . . . . . . . . . . . .40-60°C (104-140°F)
Side garnish.. . . . . . . . . . . . . . . 20-30°C (68-86°F)
(3) Apply pressure fully to the side garnish.
I