OPEN
Limit switch B ,
00002722
BODY - Sunroof
SUNROOF MOTOR CHECK
Battery connection terminal
1
0
I
I
I
LIMIT SWITCH CONTINUITY CHECK
1. Remove the limit switches from the sunroof motor, and
then check the operation of the limit switches.
Switch position
ON
Limit switch A
OFF
ON
Limit switch B
OFF
2. Check the identification colors. Then install the limit
switches as shown in the illustration.
ROTATION SENSOR CHECK
1. When connecting an ohmmeter negative probe to terminal
(3) and the positive probe to terminal (8), there should
be continuity. When the probes are reversed, there should
be no continuity.
2. Remove the cover, and then check that there is no
continuity when connecting the negative probe to terminal
(7) and the positive probe to terminal (8). Also check
that there is continuity when the probes are connected
to the same terminals and light is shined onto the sensor
receiver.
Drive gear rotation direc-
tion
2
Right
Left
Terminal No.
5
6
0
0
0
42-6 1
I
8
0