ENGINE COOLING
REMOVAL SERVICE POINT
DISCONNECTION
Use a plug or otherwise cover the hose and nipple part of
the radiator so that dust, dirt, foreign materials, etc. do not
enter after the hose has been disconnected from the radiator.
INSTALLATION SERVICE POINT
CONNECTION
Connect the radiator fan motor connector to the body harness.
Then, insert into the shroud hole and fix securely.
INSPECTION
Check for foreign material between radiator fins.
l
Check the radiator fins for bent, or damage.
l
Check the radiator for corrosion, damage, rust or scale.
l
Check the radiator hoses for cracks, damage or deteriora-
l
tion.
Check the reserve tank for damage.
l
Check the automatic transaxle oil cooler hoses for crack-
l
ing, damage or deterioration.
RADIATOR FAN MOTOR CHECK
(1) Check to be sure that the radiator fan rotates when battery
voltage is applied between terminals (as shown in the
figure).
(2) Check to see that abnormal noises are not produced,
while motor is turning.
TSB Revision
14-7