Mitsubishi 3000GT Service Manual page 1171

there continuity between each of them
No
terminal of SRS Check Harness con-
For terminals No. 15 and No. 18 of the
there continuity between each of them
and the body ground?
No
NOTE - IMPORTANT
(1) After repairing the SRS, reconnect the battery cable, erase the diagnostic trouble code memory
from the scan tool and check the SRS warning light operation to verify the system functions
properly. (Refer to TEST 1.)
(2) SDU = SRS Diagnosis Unit
SRS - Troubleshooting
Is the resistance between the terminals
of the left front impact sensor normal?
Front wiring harness is grounded or
open.
Is there continuity between left front im-
No
Short-circuitof the harness between left - Replace harness.
front impact sensor and SRS diagnosis
unit.
of the right front impact sensor normal?
Is there continuity between right front
impact sensor terminal and sensor
bracket?
No
Short-circuit of the harness between - Replace harness.
right front impact sensor and SRS diag-
nosis unit.
Replace the left front impact sensor.
(Refer to P.52B-68.)
Replace the right front impact sensor.
Yes
(Refer to P.238-68.)
Yes