Mitsubishi 3000GT Service Manual page 1300

FULL AUTO AIR
CONDITIONING - Line and A/C Engine Coolant Temperature Switch / Other Parts
Air intake hose A
Air hose 6
Hose end: Paint mark
Pipe end: Protrusion
OTHER PARTS
Service procedures for other parts are the same as those in HEATERS AND MANUAL AIR CONDITIONING.
Part name
Heater Unit
Blower Motor Assembly
Evaporator-Removal and Installation
Compressor, Condenser, Condenser Fan Motor, Refrigerant
INSTALLATION SERVICE POINTS
Air intake
hose C
INSTALLATION
Align the cutouts in air intake hose A indicated by arrows
with the A markings on air intake hoses B and C and insert
hoses B and C all the way into hose A.
Insert the other end of air intake hose B all the way into
turbocharger side.
When installing the air hoses, make sure that the alignment
marks at places indicated by arrows are properly aligned.
Insert each air hose until it hits the root of step or it bottoms.
Caution
Be careful
air
the hoses, pipes, or the charge air cooler itself.
Ref. page
Evaporator - Disassembly
Compressor- Disassembly and Reassembly
Ventilators
B
not to allow any foreign matter to get into
Part name
and Reassembly
Ref. page
42