Mitsubishi 3000GT Service Manual page 785

Throttle Position Sensor I Stop Light Switch / Position Detection Switch /
ECS
TSB Revision
INSPECTION AND ADJUSTMENT
Refer to GROUP 13A - Fuel System.
To remove or mount the stoplight switch, refer to GROUP
35 - Brake Pedal.
INSPECTION
Refer to GROUP 35 - Brake Pedal.
To remove or mount the position detection switch and damping
force changeover actuator, refer to GROUP 33A - Strut As-
sembly and GROUP 34 - Shock Absorber Assembly.
Caution
The position detection switch and damping force change-
over actuator are built into the shock absorber assemblies
of front and rear suspensions. Since they are of the non&
disassembly type, remove or mount them in the form
of a strut assembly or shock absorber assembly.
To remove or mount the ECS indicator lights, refer to GROUP
54 - Meters and Gauges.