ENGINE AND EMISSION CONTROL - Cruise Control System
Sensors and switches removal
steps
29. Throttle position sensor
30. Accelerator pedal switch*'
31. Stop light switch
32. Clutch pedal position switch <M/T>
33. Vehicle speed sensor <Non turbo>*2
(Refer to GROUP 54 - Meters and
Gauges.)
34. Vehicle speed sensor*3 (Refer to
GROUP 54 - Meters and Gauges.)
35. Park/neutral position switch <A/T>
TSB Revision
0 0 0 0 2 4 4 6
Equipped on
Up to
1993 models
models (Turbo) and From
1993
INSTALLATION SERVICE POINT
CONNECTION
Route the vacuum hose over the throttle cable and connect
the hose to the vacuum pump so as to prevent the slackened
hose from interfering with other parts.
INSPECTION
Check the inner and outer cable for damage.
l
Check the cable for smooth movement.
l
Check the link protector for damage.
l
INSPECTION OF INDIVIDUAL PARTS
Refer to On-vehicle Service - individual Parts Inspection
1992 models only
1994 models